
Home / Mini-Split Repair
Ductless Mini-Split Repair in Rhode Island and Massachusetts
A mini-split that will not cool, drips on the wall or flashes a code is easier to fix when you know what to look at first. Here is what to check, what a technician looks at and how to tell a repair from a replacement.
Signs Your Mini-Split Needs Repair
- It runs, but the room does not cool or heat
- Water drips from the indoor unit or runs down the wall
- A light blinks on the indoor unit, or the display shows an error code
- Ice forms on the indoor unit, or stays on the outdoor unit
- Rattling, humming or clicking from either unit
- One indoor head works and another does not
- The unit will not turn on, or ignores the remote

What to Check Before You Call
- Power: the display lights up and the remote has fresh batteries
- Mode and setting: the mode matches the season and the set temperature is past the room temperature
- Filters: a clogged filter is a common cause of weak airflow, so look at it before anything else. Your owner's manual should explain how to remove yours
- Outdoor unit: clear of snow, leaves and debris, with the unit off while you clear it
If a breaker has tripped, do not keep resetting it. Leave it off and call. Opening a unit, handling wiring and adding refrigerant are jobs for a technician.

What Gets Checked on a Ductless System
A mini-split has an indoor unit, an outdoor unit and the lines between them. A problem can start in any of the three.
The Indoor Unit
Filter, coil, condensate drain and fan. Water inside the house is often a clogged drain or a dirty coil, and weak airflow often starts with a filter or coil.
The Outdoor Unit and Lines
The outdoor coil and fan, and the lines and connections that join the outdoor unit to each indoor head. A unit buried in snow or packed with leaves may not move heat well.
Electrical and Controls
Electrical connections, capacitors, sensors and the control board, plus the signal from the remote. Error codes can point to these parts.

What Common Problems Often Point To
A symptom narrows the search. It does not name the part, and a technician confirms the cause.
Not cooling or not heating. Start with the filter, the mode and the outdoor unit. Some ductless units only cool, so a unit that never heated may be a cooling-only model. Check the model with the label on the indoor unit or the manual.
Water or ice. Water from the indoor unit usually means the condensate drain is backed up or the coil is dirty. Ice on the indoor unit usually points to low airflow or a refrigerant problem. Turn the unit off to stop the water or let the ice melt, and do not chip it.
Blinking lights and error codes. Codes differ by maker, and the manual usually lists what yours mean. Write down the pattern or code and the model number from the label before you call.
One head works, another does not. Each indoor head has its own filter, coil, drain and fan, so one head can have a problem the others do not. If every head on the same outdoor unit is affected, the outdoor unit or its power supply is the likelier place to look.

Repair or Replace?
A failed capacitor, fan motor or drain clog is a repair. The harder call is an older system that keeps needing work.
ENERGY STAR lists a heat pump or air conditioner more than 10 years old as one sign to consider replacing it, and equipment that needs frequent repairs while energy bills go up as another. Age alone does not decide it, which is why we look at the whole system. If you are weighing a new one, see mini-split replacement, or ductless mini-splits for how the systems work.
Cold-Weather Notes
Frost on the outdoor unit in cold, damp weather can be a normal defrost cycle. Ice that stays for hours, a frozen fan or a buried unit is a reason to call. ENERGY STAR requires third-party verified low-temperature performance for cold climate air-source heat pumps, with testing down to 5°F, but a unit still needs a clear path for air. More on defrost and winter operation is on heat pump repair and service.

Mini-Split Repair Questions
Why is my mini-split running but not cooling or heating?
Check the filter, the mode and the outdoor unit first. If those are fine, the cause can be a dirty coil, a failed fan or part, or a refrigerant leak, and a technician needs to confirm which. Some ductless units only cool, so a model that never heated may not be a heat pump.
Why is water dripping from my mini-split indoor unit?
Most often the condensate drain is clogged or the coil is dirty. Turn the system off to stop the water, and call if it keeps dripping.
What does a blinking light or error code mean?
It depends on the maker, and the manual usually lists the codes for your model. Note the pattern or code and the model number, then tell us when you call.
Do you repair ductless mini-splits?
Yes. We diagnose and repair central air systems and ductless mini-splits, and RTP HVAC serves all of Rhode Island and Massachusetts, including Warwick. Tell us the brand and the symptoms when you call.
Is it worth repairing an older mini-split?
It depends on its age, how often it has needed work and what the repair involves. We will go over repair and replacement options with you at the estimate, and the estimate is free.
Sources: ENERGY STAR, When Is It Time to Replace and ENERGY STAR, Ductless Heating and Cooling.
Get a Free Estimate
Tell us what is going on with your system. We will get back to you with next steps.
A Rooftop Power Company